(compliant ISO/IEC 17025 and IATF16949)
Since 1995 we are certified according to DIN EN ISO 9001.
You can find an overview of the certificates you receive for our devices here, as well as example certificates.
You require “DKD/DAkkS-traceability” for your measurement equipment?
Option 1: A DAkkS traceable calibration chain for the measurement equipment
As a DIN EN ISO 9001 certified company, we subject all of our test equipment to routinized test equipment inspection. Thus, its functioning is securely monitored and features traceability in accordance with the DAkkS calibration chain.
For this reason, you can order "DAkkS-traceability certification" along with the calibration of your devices. The calibration is then performed exclusively with equipment having DAkkS traceability.
Option 2: "DAkkS-calibration certificate" for your device
imc is not a DAkkS-accredited laboratory. But we will be happy to provide you with a custom calibration certificate through an accredited calibration laboratory cooperating with imc.
- imc incoming calibration with measurement value logs
- External, DAkkS-compliant laboratory incoming calibration
- imc outgoing calibration after adjustment, with measurement value logs
- External, DAkkS-compliant laboratory outgoing calibration
The regulation IATF 16949:2016-10 requires a laboratory certified per DIN EN ISO/IEC 17025 or comparable standards. What are my options?
The IATF16949 and the tightened clause 220.127.116.11 “Requirements for External Laboratories” still make it possible to meet this requirement without imc Messysteme GmbH needing to possess either ISO/IEC 17025- or DAkkS certification.Instead it is necessary to ensure that imc can meet your requirements. This can be accomplished at a workshop, for instance, or by an audit on the customer side.We are gladly available for questions, and willing to be in touch with your QS-department.
Why is imc not IATF certified?
imc is a manufacturer of measurement devices. The certified attestation applicable to imc is ISO9001-certification.
imc Messsysteme GmbH does not possess an accredited laboratory department nor is it a calibration laboratory.
Our procedures take the requirements of ISO/IEC 17025 and of IATF 16949 into account.
In audits performed by our customers, it has been demonstrated that imc meets the applicable requirements of ISO/TS 16949.